Our client wanted his chimney waterproofed – which would also seal where it joins the roof and ensure braai success for years to come!

Using 4mm torch-on, our team waterproofed the chimney. We also applied two coats of Silver Coat to protect the torch-on from the UV rays of the sun.

We waterproofed five different roofs of a home in Yzerfontein ahead of the installation of solar panels.

Our client planned to install solar panels on most of the roofs of their home. Our first step was therefore to waterproof the roofs with 4mm torch-on. After the solar panel contractors placed their brackets on the roofs, we waterproofed again. To protect the torch-on, we completed the process with Silver Coat.

We also spruced up the client’s wooden deck with 2 coats of varnish. This will also prolong the longevity of the wood.

We recently did some waterproofing and painting work for a client in Atlantic Beach Golf Estate whose balcony needed some attention.

To start, we chopped up the existing tiles on the balcony and removed them, before preparing the surface to screed it. We then primed the balcony with bitumen.

To prevent future water damage, we added a layer of torch on, which is a great way to waterproof a construction surface. In addition to allowing for overlaps and turn-ups, we also applied counter flashings to the side walls for additional protection.

After applying bonding liquid and cement slurry to the torch-on, the sliding doors and windows were refitted and the balcony was re-tiled. The balcony was now restored to its original ‘new’ condition and looked amazing!

The next step was to make sure the front of the house looked as good as new. So, we scraped off loose and flaking paint from the front façade of the balcony and ceiling. All the cracks were repaired with a suitable filler. We then sanded the areas that were worked on to achieve a smooth finish, and applied spot prime. To complete the work, we applied 2 coats of paint that blended in with rest of the house and also to meet the rules of the estate.